Horotec MSA02.012 Double Pin Vise Same As Bergeon 5679

Pay Attention:

• Watchmaker tool and watch movement should be checked immediately upon receiving your shipment.
• Every watchmaker tool and watch movement are tested and running at factory specifications at the time of manufacturing with No Express Warranty and Non-Returnable.
• Within 7 days of receipt if the item does not meet your satisfaction, please contact us with any questions.
• Watchmaker tool and watch movement showing signs of work or damage, lint or fingerprints, missing parts, or without genuine packaging will not be considered for return.

Product Details:

• Model : MSA02.012
• Tightening mm : 0…2.8
• Length mm : 110
• Weight : 0.038kg
• Horotec Double Pin Vise, Opening 0-2.8mm, 110mm Long. Fluted hollow nickel plated handle
• Double-ended pin vice with fluted hollow nickel-plated handle and 2 knurled round heads.
• Provided with 2 steel 4-lip chucks.
• This double ended pin vice is a useful tool when you want to do something by hand that may require a more precise application. 
• Swiss made by Horotec
• Hold it as you would a pen for hand carving and engraving on glass, stone or wood with a diamond ball burr. 
• Use it for bead reaming with a diamond point burr, hold cup burrs for rounding off the ends of wires. 
• Use it to stipple engrave on glass, or create fine hair lines or fur with a diamond point bur. 
• Ideal for holding many items such as drill bits, burrs, cutting broaches, taps, wires, screws and winding stems.
• Each end has a collet. 
• Unscrew so that the teeth inside loosen and then place your drill, screw, reamer or burr inside and re-tighten. 
• Two collets, one holds up to 1.40mm and the other end 1.30mm - 2.80mm
• When you don't want to use an electric drill, or are perhaps unable to use a drill due to health and safety issues, these little pin vices will do the trick.