Swiss Made Ronda 732 1032 Customized Quartz Watch CPU Board
Custom circuit board to replace circuits. Fits RONDA 732 movement and all movements with the same dimensions (imaginary and physically identical movement)
The custom watch CPU has been designed to switch any type of secondary chronograph function, including sweep secondes, timer and alarm... leaving the classic three hands on one dial.
All standard functions remain accessible after installation. The top view and side view only show the general appearance, touch controls and included packaging.
The components fit perfectly inside your wrist watch case. This is not a physical board like the one currently used by your watch. It requires mounting and wiring. The assembly must (in most cases) be carried out with the necessary skills.
Please order reference number depending on customised kit please
White background Grey background Blue background Red background
Black background Green background
* BRAND NEW * WARRANTY OF 1 YEAR *
(Refer video 1 - functional demonstration)
(Videi 2 - useful instruction)
Installation requires some electronic knowledge and soldering skills. Working on movements implies taking certain precautions. It is essential to handle the mechanisms gently during installation. Standard instructions are provided with each board, but Xiamen HogeRF Technology Co.,Ltd cannot guarantee that all installations will be performed without issue.
Unlike shell kits alread assembled, these are component Kits for hobbyists and advanced watchmakers. Please pay attention to the required elements if you want to receive a complete Kit!
How do things work?
This watch kitlet is based on the Ronda 732 Quatz mechanism family that is widely available. It is created to easily add extra functionality to that watch.
There are four buttons on the board: A, B, C & D which control the extra counters and capabilities.
What comes in the box? （Videi 1）
---
1 x Main Board
1 x At least One Display screen menctioned above
1 x Small screwdriver
1 x small flat head Spanner
1 x Free Watch Winder *Promotional gift*
Only one display screen for this set. With coloured buttons. If you want different screens sizes or displays, use the drop-down menus to select your choice. Each additional option costs extra (the drop-down menus include prices).
XIAMEN HOGERF TECHNOLOGY CO.,LTD WORKSHOP
---
About the differences between this and other balance hole movement
This alternative uses a dedicated microprocessor instead of mechanical gears. The size of the board means it can always be installed in any wristwatch with enough internal space—the actual space occupied by the central processing unit is that of a typical computer chip.
VIDEO DEMONSTRATION
When turning on, the cruscots move at high speed. Then, to adjust the clock, press button A until the hours indicator starts blinking. Then pressing the up or down buttons will correct each value. To confirm and change the next value, press again the A button. Carrying out the whole procedure for hour, minutes, date and day completes the setup.
When the clock is running correctly, two pushbuttons allow you to use two extra features, in addition to the standard stopwatch function, which remains accessible via the top pusher.
A chronograph ( stopwatch ) allowing to count a fraction of time with a precision of 1/100 seconds over a period of maximum 23h 59min 59s 99.
A timer ( count down ) allows to count backwards a specific amount of time
from 1 minute to maximum 23 h 59 min.
HOW TO USE & FUNCTIONS
The buttons A, B, C and D carry out the following functions.
• A increases values and selects fields to be adjusted
• B activates the stopwatch (Chronograph )
• C activates the countdown timer
• D goes back to the previous field, stops the stopwatch and timer
For more details on installing and using an alternative movement, consult the user manual and videos provided. Some installation guidance is available online.
INSTALLING
To install the device, take your existing watch outer parts for guidance. Using a Phillips screwdriver, open the back case of the watch.
Then remove the old mechanism. IMPORTANT: whenever possible, remove the hand system, crystal and hands from the old movement and transfer them to the new movement. The old steady stem should be able to transfer to the new board.*
It is also important to remember that many watch cases have a spring clip around the edge of the back plate to seal the case against moisture. This clip is held in place by pressure and usually needs to be pried off carefully.*
Make sure there is sufficient free space inside your watch case for the new movement, wiring harness and any battery you might need.
We recommend placing the new movement in precisely the same position as the original.
The new printed circuit board has pre-drilled holes for mounting, just like the original movement.
Connect wires from the new controller board to your existing hands, stem and other parts according to the assembly drawings belonging to your specific project.
And then test the watch where possible before closing up the watch case.
Finally, close the back plate of the watch and reassemble the watch, making sure you get everything back together properly*
WARRANTY
Time frame begins with the original purchase.
This limited warranty covers defects arising from material and workmanship problems ONLY..
-. Excluded are batteries, solar cells, and damage caused by accidents, negligence, tampering, inadequate maintenance.
-. Unless otherwise stated, our items are covered by this manufacturer's warranty.
-. Our items are guaranteed to perform as expected under normal use.
-. Any claim under this warranty shall be processed exclusively through the contact details provided by the seller.
AVAILABILITY
If you are a reseller, white label partner, or have any other special purchasing requirements, please email us.
For immediate assistance, please send us an email detailing your request.
We offer support for designs and applications upon request.
SALE CONDITIONS
The sales conditions for the items in our store are available upon request.
By purchasing this item, the buyer accepts all terms and conditions stipulated by the seller.
Before leaving feedback, please contact us if you encounter any problems with your order.
TITLE & WARRANTY
The PRODUCER explicitly retains ownership of the goods until full payment has been received.
In cases of revocation, the right of possession shall accrue automatically to the producer.
The goods are safeguarded solely for the purpose of collection of the outstanding price.
Delivery occurs within 7 days after payment has been credited to the account of the producer.*
The sale is final. No returns are accepted without prior approval from production management and a restocking fee of 25% of the selling price may apply.
* Please note that all Watches measurements are approximately and can vary slightly due to manufacturing tolerances and fractionation of parts.
