QBC-22 Quartz Watch Impulse Button Battery Tester Analyzer Watch Repair Tool

This is a reliable “Q.C” Checker for Watch Movement Makers and Watch Assembling Factories.It not only checks the quartz watch itself, but also the button batteries.

Steps below help you do the job:

For Quartz Impulse Checker 1. Push the switch upward. 2. Put the quartz watch or movement on the “Watch Dial Position” for testing, one of the following results will occur. {A) No sound and no green light: =Either the Battery or the Electronic parts are in poor condition. Solution: Check / renew battery and re-test. If still no reaction, check /renew Electronic parts or complete movement. {B) If there is a sound and the green light flashes, but the watch hands do not move: =The Battery and the Electronic parts are in good condition, but the Mechanical parts are in poor condition. Solution: Check / renew Mechanical parts and re-test. If still no reaction, renew complete movement. {C) If hearing a sound, the green light flashes and the watch hands are moving:=The quartz watch or movement is in good condition. For Button Battery Checker 1. Push the switch downward. 2. Put the battery onto the “Battery Checking Plate Position” for testing; ensure positive {+) side is downward. 3. Press down the plastic button, the battery level lights will indicate the voltage. Yellow light =Renew is necessary, weak voltage 1st green light =Low, 10.5 volts. 2nd green light = Good, 1.55 volts. 3rd green light =Good, 3.00 volts. Battery : LR03/AAA size, 1.5Vx 2 {not Included)